Acid Pump
Home Acid Pump

CYQ-High Temperature Resistant Sulfuric Acid Magnetic Drive Pump

CYQ-High Temperature Resistant Sulfuric Acid Magnetic Drive Pump

Sulfuric Acid Magnetic Drive Pump is lined with fluoroplastic (PFA, FEP) and can withstand sulfuric acid of any concentration within -20-180℃.

  • Flow Range :

    0.8~400m³/h
  • Head Range :

    3~80m
  • Power :

    0.18~55Kw
  • Temperature :

    -20-180℃

CYQ-High Temperature Resistant Sulfuric Acid Magnetic Drive Pump

CYQ pumps have the following design features:

The flow part of CYQ sulfuric acid magnetic drive pump is made of fluoroplastics, which can continuously transport corrosive media such as acids, alkalis, strong oxidants, etc. of any concentration. The shaft seal is cancelled, and the indirect drive is used by magnetic coupling, which eliminates the trouble of dripping and does not pollute the use site. CYQ fluoroplastic magnetic pump has the advantages of compact structure, beautiful appearance, small size, low noise, and reliable operation.

 

Instructions for use

  • Sulfuric acid magnetic pump should be installed horizontally, not vertically. The pump body should not bear the weight of the pipeline. For special occasions where vertical installation is required, the motor must face upward.
  • When the suction liquid level is higher than the pump axis, open the suction pipe valve before starting. If the suction liquid level is lower than the pump axis, the pipeline needs to be equipped with a bottom valve.
  • The pump should be checked before use. The motor fan blades should rotate flexibly, without jamming or abnormal sounds, and all fasteners should be tightened.
  • Check whether the motor rotation direction is consistent with the magnetic pump steering mark.
  • After the motor starts, slowly open the discharge valve. After the pump enters the normal working state, adjust the discharge valve to the required opening.
  •  
  • Before the pump stops working, close the discharge valve first and then cut off the power supply.

We can according to actual working condition, choose different configuration, provide an accurate solution. Technical consulting, please contact us!

 

FAQ

1.Which Pump is Used for Sulphuric Acid?

The best pumps for handling sulphuric acid are typically chemical process pumps designed with materials resistant to corrosion. Common types include diaphragm pumps, magnetic drive pumps, and positive displacement pumps. These pumps are usually made from materials like PTFE (Teflon), PVC, or 316 stainless steel to ensure safe and effective operation.


2.How to pump sulfuric acid?

To pump sulfuric acid, use a corrosion-resistant pump specifically designed for handling acids, such as a diaphragm or magnetic drive pump. Ensure the pump and all piping are made from materials like PTFE or PVC to prevent corrosion. Always follow safety protocols, including wearing protective gear, and ensure proper ventilation in the area. Before starting, check for leaks and ensure that the pump is primed correctly to avoid air locks.


3.Which material is most suitable for sulfuric acid pump?

The most suitable materials for sulfuric acid pumps are PTFE (Teflon), PVC, CPVC, and 316 stainless steel. These materials provide excellent resistance to corrosion and can handle the aggressive nature of sulfuric acid effectively, ensuring safe and efficient operation.


4.Why can't the magnetic pump run dry?

The primary reason that magnetic pumps cannot run dry is that they rely on the liquid medium for cooling and lubrication. In normal operating conditions, the liquid not only provides power but also reduces friction and heat generation between the internal components of the pump. If the pump operates without liquid, the internal components can become damaged due to overheating, especially the magnetic coupling and other critical parts, which may experience significant wear or failure. Additionally, the lack of liquid can cause the impeller to make direct contact with the pump casing, further exacerbating wear and potentially leading to rapid equipment failure. Therefore, to ensure the safe and effective operation of magnetic pumps, it is essential to avoid running them in a dry state.


5.How do you transport sulfuric acid safely?

To transport sulfuric acid safely, follow these guidelines:

  1. Use Appropriate Containers: Ensure that the acid is stored in corrosion-resistant, labeled containers specifically designed for hazardous materials.
  2. Personal Protective Equipment (PPE): Wear appropriate PPE, including gloves, goggles, and protective clothing.
  3. Secure Transportation: Use a secure and stable vehicle equipped to handle hazardous materials, ensuring the containers are strapped down.
  4. Ventilation: Ensure proper ventilation in the transport area to avoid the buildup of fumes.
  5. Emergency Preparedness: Keep spill kits and neutralizing agents nearby in case of accidental leaks or spills.
  6. Follow Regulations: Adhere to local and international regulations regarding the transportation of hazardous materials.

By following these precautions, you can help ensure the safe transport of sulfuric acid.

Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products

Horizontal Slurry Pump
UHB Series Chemical Horizontal Slurry Pump

UHB Series Chemical Horizontal Slurry Pump is a cantilever single-stage single-suction centrifugal pump, which is specially designed and developed for conveying corrosive media containing fine particles.

Details
Stainless Steel Magnetic Pump
CYC Series Heavy Duty Stainless Steel Magnetic Pump

Heavy-duty magnetic pump, designed in accordance with API685 standard, flange pressure resistance 1.6Mpa.Applicable to petrochemical, biomedicine, new energy, pesticide chemical and other fields.

Details
Horizontal Slurry Pump
CYB-ZKJ Series Corrosion Resistant Horizontal Slurry Pump

The CYB-ZKJ series is designed for handling highly corrosive liquids. It is made of special materials and is therefore corrosion-resistant and wear-resistant.

Details
Chemical Mortar Pump
CYG-ZKN High Temperature Chemical Mortar Pump

CYG-ZKN High Temperature Chemical Mortar Pump is suitable for conveying various types of corrosive liquids, slurries and mineral slurries at -20-180℃, and has a wide range of applications.

Details
Fluoroplastic Centrifugal Pump
CYF Series Fluoroplastic Centrifugal Pump

CYF is a single-stage single-suction centrifugal pump, which is manufactured according to international standards and combined with non-metallic pump technology.

Details
Fluoroplastic Submersible Pump
FYH Series Fluoroplastic Submersible Pump

The pump is submerged in liquid, there is no need to fill the liquid during operation and it is easy to repair. FYH Series Fluoroplastic Submersible Pump is installed vertically, with a small footprint.

Details
Fluorine-Lined Magnetic Drive Pump
CYQ Concentrated sulfuric acid transfer magnetic pump

Magnetic pump coupling drive, no shaft seal, zero leakage. Therefore,CYQ Concentrated sulfuric acid transfer magnetic pump is particularly suitable for conveying flammable, explosive and toxic liquids.Such as concentrated sulfuric acid, concentrated nitric acid, caustic soda, etc.

Details
Sulfuric acid magnetic pump
CYQ-High Temperature Resistant Sulfuric Acid Magnetic Drive Pump

Sulfuric Acid Magnetic Drive Pump is lined with fluoroplastic (PFA, FEP) and can withstand sulfuric acid of any concentration within -20-180℃.

Details

Leave a message

Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Our hours

Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)

Contact Us:jade@changyupump.com

Home

Products

whatsApp

contact